Filter
Top Products
10
11
Basic Operation | Elite-5 HDI
Basic Operation | Elite-5 HDI
Standby mode
Lowers power consumption by turning o sonar
and the display.
1. Press the PWR/LIGHT
key to access the Back-
light dialog.
2. Select Standby and
press ENTER.
3. Press any key to resume normal
operation.
Restore defaults
Sets unit options and settings
to default values.
Advanced Mode
Enables advanced features and settings.
The following features are enabled when Advanced
mode is turned on:
• Navigation (Enables arrival radius, off-
course distance and Bearings setting)
• Alarms (Enables arrival, off course and
anchor alarm options)
• NMEA 0183 conguration options
• Units (Enables distance, speed, depth,
temperature and bearings conguration
options)
NOTE: Leaving your unit in Standby
mode when your boat is not in use will run
down your battery.