Filter
Top Products
30
PB
Sonar Operation | Elite-5 HDI
Sonar Operation | Elite-5 HDI
Installation
Keel Offset
All transducers measure water depth from the
transducer to the bottom. As a result, water depth
readings do not account for the distance from the
transducer to the keel or from the transducer to the
water surface. Before setting keel oset, measure
the distance from the transducer to the lowest part
Installation menu
of the keel. If, for example, the keel is 3.5 feet below
the transducer, it will be input as –3.5 feet.
Water speed calibration
Calibrates a paddlewheel speed sensor with speed
data from a GPS source.
Temperature calibration
Calibrates data from the transducer temperature
sensor with data from a known temperature source
to ensure the accuracy of temperature information.
Reset water distance
Resets the Water Distance value to zero.
Transducer Type
Selects the transducer model attached to your unit.
You must select the correct transducer type to get
the best sonar performance from your unit.
Keel
Transducer
Keel Offset (-3.5 feet)