Lowrance electronic X510C SONAR User Manual


 
38
Calibrate Water Speed: adjusts how a speed sensor measures water
speed.
Reset Water Distance: resets water distance log to zero.
Sonar Simulator: turns the simulator feature on and off.
Transducer Type (dual-frequency units only): sets the type of trans-
ducer plugged into the unit.
Reset Options: returns all options and auto functions to their origi-
nal factory settings. It's a great safety net while you're learning and
experimenting with various settings.
Set Language: your unit has menus in 10 different languages. This
command switches from one language to another.
Enable Radar Port: allows you to turn the radar port on and off.
NMEA 2000: gives you access to all NMEA 2000 network setup op-
tions, including the configuration of devices on the network.
Software Information: tells you which version of the operating
software is loaded in your unit.
Sonar Menu
The Sonar Menu contains commands for the major sonar features and
options. You access the Sonar Menu by pressing the
MENU key one
time. You run a command by using the or to highlight the command
and then pressing
ENT. To clear the menu screen and return to the
Page display, press
EXIT.
Sonar Page Menu.
Sonar Menu Commands
The Sonar Menu contains commands for the major sonar features and
options. Most of them are only described in detail in Sec. 4, but Sensitiv-
ity and Auto Sensitivity are important basic functions that are discussed
both here and in Sec. 4. The other Sonar Menu commands include: