Filter
Top Products
83
There are three levels of surface clarity available: low, medium, or
high. It can also be turned off. The default level is off.
To adjust the Surface Clarity level
1. From the Sonar Page, press
MENU|↓ to SONAR FEATURES|ENT.
2. Press ↓ to
SURFACE CLARITY|ENT.
3. Press ↓ or ↑ to select clarity level|
EXIT|EXIT|EXIT.
Sonar Features menu with Sonar Features selected (left). Surface Clar-
ity highlighted on Sonar Features menu (right).
In the first illustration (left), Surface Clarity is turned off.
The second example (right) Surface Clarity is set to High.
Transducer Type
(X-515cDF only)
A dual-frequency unit includes a TRANSDUCER TYPE command. With this
option you can tell your unit what type of transducer you're using, so it
can properly interpret the signals it's receiving.
Surface clutter