Filter
Top Products
28
DUAL-FREQUENCY SPLIT CHART
(X58DF only)
This page shows sonar data from the 50 kHz transducer element on the
left side of the screen and data from the 200 kHz transducer on the
right side. All other functions and features are the same as the Full
Chart page.
Dual-Frequency Split Chart page, with
50 kHz view at left and 200 kHz view at right.
You can adjust the sensitivity in each window. To change the 200 kHz
window's sensitivity, press
MENU
until the
S
ENSE
200
K
menu appears. Press
UP ARROW
to increase the sensitivity,
DOWN ARROW
to decrease it. When
it's set at the desired level, press
PWR
to clear the menu. Change the 50
kHz window sensitivity in the same way, but use the
S
ENSE
50
K
menu.
Dual-Frequency Split Chart page. The 50 kHz sensitivity menu is
shown at left and the 200 kHz sensitivity menu is shown at right.