Filter
Top Products
2
Sonar
Frequency:...................... 200 kHz (or 50/200 kHz – X58DF only).
Transducers: .................. A dual-frequency Skimmer
transducer
comes packed with the X58DF. It has 35°/12°
cone angles. Single frequency models for X51
with a 20° cone angle are sold separately.
Both models offer a wide fish detection area
of up to 60º with high sensitivity settings.
Transmitter: ................... 1500 watts peak-to-peak power (typical); 188
watts RMS power (typical).
Sonar sounding
depth capability: ........... 800 feet (244 meters) at 200 kHz; 1500 feet
(450 meters) at 50 kHz (X58DF only). Actual
capability depends on transducer configura-
tion and installation, bottom composition and
water conditions. All sonar units typically
read deeper in fresh water than in salt water.
Depth display:................ Continuous digital readout.
Audible alarms: ............. Deep/shallow/fish.
Automatic ranging:....... Yes, with instant screen updates.
Zoom bottom track: ...... Yes.
Split-screen zoom:......... Yes.
Surface water temp: ..... Yes, with optional external temperature sen-
sor, combo speed/temp sensor or transducer
with built-in temp.
Speed/distance log: ....... Yes, with optional speed sensor or combo
speed/temp sensor.
Key features: FishReveal; HyperScroll; Grayline
; ASP; Fish I.D.
symbols; FishTrack; full one-year warranty.
NOTICE!
The storage temperature for your unit is from -4 degrees to +167
degrees Fahrenheit (-20 degrees to +75 degrees Celsius). Extended
storage in temperatures higher or lower than specified will damage
the liquid crystal display in your unit. This type of damage is not
covered by the warranty. For more information, contact the fac-
tory's Customer Service Department; phone numbers are inside the
manual's back cover.
Transducer Installation
These instructions will help you install your Skimmer
transducer on a
transom, on a trolling motor or inside a hull. These instructions cover