Filter
Top Products
9
Using the RF Marine Remote press the corre-
sponding “VOLUME UP” button to assign this
function.
Step 4
Flashes 2 Times
The LED will flash 2 times indicating the “VOL-
UME UP” button of the radio remote has been
programmed. The LED will then turn off and is
now ready for the next button to be programmed.
Repeat Step 3 and 4 for the remaining 7 buttons.
Each button has a unique LED flash indicator
confirming when they have been programmed.
Power On/Off Button = 1 Flash
Volume Up Button = 2 Flashes
Volume Down Button = 2 Flashes
Seek Up Button = 3 Flashes
Seek Down Button = 4 Flashes
Mode/SRC Button = 5 Flashes
Mute Button = 6 Flashes
Step 5
Step 6
To exit programming push the switch on/off 3 times
or wait 15 seconds and the system will automatical-
ly exit the “Manual Code Learning” mode.
or
Manual Code Learning
(continued)