Filter
Top Products
GENERAL
SAFETY
RULES
(For
All
Battery Operated
Tools)
WARNING!
Read and understand
all
instructions.
Failure
to
follow
all
instructions listed
below,
may result
in
electric
shock, fire and/or serious personal
injury.
-
SAVE
THESE
INSTRUCTIONS
Work
Area
Keep your
work
area clean and
well
lit. Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the presence
of
flammable liquids, gases,
or
dust. Power tools create sparks which may ignite
the dust
or
fumes.
Keep bystanders, children, and visitors away while operating
a
power tool.
Distractions can cause you to
loose
control.
P
Electrical Safety
Do not abuse the cord. Never use the cord to carry the tool. Keep cord away
from heat,
oil,
sharp edges,
or
moving parts. Replace damaged cords immedi-
ately. Damaged cords
may
create
a
fire.
A
battery operated tool with integral batteries
or
a separate battery pack must
be recharged only with the specified charger
for
the battery.
A
charger that
may be suitable
for
one type
of
battery may create
a
risk
of
fire
when used with
another battery.
9
Use
battery operated tool only with specifically designated battery pack.
Use
of
any other batteries may create a
risk
of
fire.
Personal Safety
Stay alert, watch what you are doing, and use common sense when operating
a power tool. Do not use tool while tired
or
under the influence of drugs, alcohol,
or
medication.
A
moment
of
inattention while operating power tools may result
in serious personal injury.
Dress properly. Do not wear
loose
clothing
or
jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts.
Loose
clothes, jewelry,
or
long hair can be caught in moving parts.
Avoid accidental starting.
Be
sure switch
is
in the locked
or
off position before
inserting battery pack. Carrying
tools
with your finger on the switch
or
inserting
the battery pack into a tool with the switch on invites accidents.
Remove adjusting keys
or
switches before turning the tool
on.
A
wrench
or
a key that
is
left attached to a rotating part
of
the tool may result in personal injury.
Do not overreach. Keep
proper
footing and balance at all times. Proper footing
and balance enable better control
of
the tool in unexpected situations.
8
-A
2
'
15