Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
FOR CHARGER
&
BATTERY CARTRIDGE
I.
SAVE
THESE INSTRUCTIONS
-
This manual
contains important safety and operating instructions for battery charger.
2.
Before using battery charger, read all instructions and cautionary markings
on
(1)
battery charger,
(2)
battery, and
(3)
product using battery.
3.
CAUTION
-
To reduce
risk
of injury, charge only MAKITA Battery Cartridge
7000,7001,7002,9000,9001,9002,9100,9101,9101A.
9102,9102A.
9122,1200,1201,1201A,
I202,1202A,
1210,1211,1222
OR
1422. Other
types
of
batteries may burst causing personal injury and damage.
4.
Do not expose charger to rain or snow.
5.
Use
of
an attachment not recommended
or
sold
by the battery charger
manufacturer may result in a
risk
of
fire,
electric shock,
or
injury to persons.
6.
To reduce
risk
of damage to electric plug and cord, pull by plug rather than
cord when disconnecting charger.
7.
Make sure cord
is
located
so
that it
will
not be stepped on, tripped over,
or
otherwise subjected to damage or stress.
8.
An extension cord should not be used unless absolutely necessary.
Use
of
improper extension cord could result in a
risk
of
fire
and electric shock.
If
extension cord must be used, make sure:
a. That pins on plug
of
extension cord are the same number, size, and shape
b. That extension cord
is
properly wired and in good electrical condition; and
c.
That wire size
is
at least as large as the one specified in the table below.
TABLE
1
RECOMMENDED
MINIMUM
AWG SIZE
FOR
EXTENSION CORDS
FOR
BATTERY CHARGERS
as those of plug on charger;
I
Length
of
Cord (Feet)
I
25
I
50
I
100
I
150
I
MAINTENANCE
CAUTION:
Always be sure
that
the
tool
is
switched off
and
the battery cartridge
is
removed before
attempting to perform inspection or maintenance.
Recycling the Battery
The
only
way
to
dispose
of
a Makita battery
is
to recycle it. The law prohibits any other
method
of
disposal.
Ni-Cd
i-
To
recycle the battery:
1.
Remove the battery from the tool.
2.
a). Take the battery to your nearest Makita Factory Service Center
or
b). Take the battery to your nearest Makita Authorized Service Center or
Distributor that has been designated as a Makita battery recycling location.
Call your nearest Makita Service Center or Distributor to determine the location
that provides Makita battery recycling. See your local Yellow Pages under
"Tools-Electric'!
To
maintain
product SAFETY
and
RELIABILITY,
repairs, maintenance or adjustment should
be performed
by
Makita
Authorized or Factory Service Centers, always
using
Makita
replacement
parts.
AWG Size
of
Cord
I
18
I
18
I
18
I
16
I
9.
Do
not operate charger with damaged cord
or
plug
-
replace them im-
mediately.
IO. Do not operate charger if it has received a sharp blow, been dropped, or other-
wise damaged in any way; take it
to
a qualified serviceman.
11.
Do not disassemble charger or battery cartridge; take it
to
a qualified
serviceman when service
or
repair
is
required. Incorrect reassembly may
result in a
risk
of
electric
shock
or
fire.
12.
To
reduce
risk
of
electric shock, unplug charger from outlet before attempt-
ing any maintenance
or
cleaning. Turning off controls will not reduce this risk.
6