Filter
Top Products
Specific Safety
Rules
1.
Always keep your hands and face away from vibrating head when operating.
2.
Switch
off
the tool immediately
if
you notice abnormal noise or something
3.
Inspect the tool carefully
for
breakage, cracks or deformation
if
you acciden-
4.
Do
not charge the battery cartridge in locations where lacquer, paint,
5.
Do
not charge on cardboard
or
paer, cloth or bedding, straw mats, carpet-
6.
Do
not charge
in
a dusty place or where lint accumulates.
7.
Do
not allow pieces of metal, water or other foreign objects to get into the
charger, port where the charging terminals are located.
8.
Do
not carry the tool with finger on switch.
9.
Do
not set the tool down and switch it on. The vibrating head may whip
around out
of
control and cause an accident.
IO.
Be
careful not to allow water, wet concrete or the
like
to get into the tool.
Do
not let the tool fall into wet concrete.
11.
Insert the vibrating head carefully between ironlsteel frames or reinforcing
rods not to come in contact with them.
12.
Do
not crush
or
twist the flexible hose.
13.
Do
not overly bend the flexible hose.
14.
Use
a wet cloth or the
like
to carefully wipe off any wet concrete left on
the tool after use. Extra care should be given to thorough cleaning
of
the
vents, switch area, cover openings, etc.
faulty during operation.
tally drop it or strike it against something.
benzene, thinner, gasoline, gas or adhesive are storedlused.
ing,
vinyl
or
the
like.
n
Apr.-03-'37
US
CORDLESS VIBRATING POKER
Model
VR250D
\\
Q
a@
70
\\I
Note: The switch and other part configurations
may
differ
from
country
to
country.
4
13