Multiquip C30HDG Marine Radio User Manual


 
PAGE 4 — INSTALLATION OPERATION MANUAL — REV. #0 (08/19/09)
OVERVIEW
ALWAYS read manual before attempting to operate the
equipment. Failure not to read manual could cause severe
equipment damage and or damage to the receiver and
transmitter.
Make sure work area is safe to operate radio control receiver and
transmitter.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
If any problems or malfunctions occur using this product, discontinue use
immediately, and refer to the Troubleshooting Guide in this manual. If the
problem persists, call your equipment dealer immediately for parts and or
service.
NOTICE
Disconnect and lock-out all power sources before
making any wiring connections to the receiver.
NOTICE
Improper operation of the transmitter receiver could
cause damage to the equipment. DO NOT allow
unauthorized personnel to operate this equipment
before reading manual.
NOTICE
MIRATRON, Inc. transmitters and receivers are not
intended for life or safety applications, MIRATRON,
Inc. shall not accept resposibility for installation,
application, or safety of machine or systems which
utilize MIRATRON, Inc. transmitters and receivers.