Filter
Top Products
PAGE 6 — INSTALLATION OPERATION MANUAL — REV. #0 (08/19/09)
CARE AND HANDLING
Transmitter:
Clean transmitter gently with a damp cloth. DO NOT immerse transmitter
in water, or spray with hose. DO NOT store outside.
DO NOT drop transmitter or otherwise subject transmitter to physical
shock.
DO NOT expose transmitter to extreme temperatures.
DO NOT open transmitter enclosure. Transmitter contains no serviceable
parts.
Receiver:
Remove receiver from machine prior to welding on machine
DO NOT paint electrical connector.
Use only factory provided antenna and cabling.
DO NOT open receiver enclosure except to change radio channel or make
adjustments to factory settings.
Use transmitter to test functions. DO NOT apply voltage to circuit board
directly.