Filter
Top Products
PAGE 46 — DCA-25SSAI — PARTS AND OPERATION MANUAL—FINAL COPY (06/30/01)
ENGINE SHUTDOWN
To shutdown the generator, use the following procedure:
1. Switch both the MAIN, GFCI and LOAD circuit breakers
(Figure 52) to the “OFF” position.
2. Set the engine throttle lever to (low) position.
3. Let the engine cool by running it for 3-5 minutes with no
load applied.
5. Remove the load from the UVW terminal strip.
Figure 52. Main, GFCI and Load
circuit breakers
DCA-25SSAI — GENERATOR SHUTDOWN PROCEDURE
4. Turn the ignition key to ‘STOP’ (Figure 53).
Figure 53. Ignition Switch ‘STOP’