Filter
Top Products
4) Raise, and hold, the lever into the inflator housing. Install a new
cylinder/bayonet assembly by engaging bayonet tabs in housing,
pushing in then turning clockwise 1/8 turn to a full stop (Fig. 8).
5) Examine the service indicator (Fig. 8) and ensure it is GREEN. If
the service indicator is red, the mechanism has been fired or is
incorrectly fitted and the inflator requires service. See Re-arming Your
PFD (MD3075) p. 6.
NOTE: The service indicator must be green before proceeding.
Service Indicator
If green, unit is operable
If red, stop and service unit
MD3085 Manual Inflator
Tab
Step 4
O-Ring
Step 3
Lever
Step 4
Service
Indicator
Step 5
Cylinder
Step 2
Sensor Ring
Step 3
Bayonet
FIGURE 7
3F Manual Inflator
WARNING: PFD WILL ONLY INFLATE IF CYLINDER IS
TURNED TO A FULL STOP.
Tab
Piercing Pin
Cylinder
Lever
Service Indicator
MD3085 Manual Inflator
1/8 Turn
Cylinder
1/8 Turn
Tab
Piercing Pin
Lever
Service
Indicator
MD3081 and MD3082 Manual Inflator
FIGURE 8
MD3075
7 Inflatable PFD Owner’s Manual