Filter
Top Products
FIGURE 16
HELP Position
EACH OF THESE DEVICES IS INTENDED TO HELP
YOU SAVE YOUR OWN LIFE
For your Inflatable PFD to function properly, follow these suggestions to
verify that it fits, floats, and remains in good condition.
1) Check the inflation mechanism status indicators before each use.
2) Get in the habit of re-arming the inflation mechanism right after
each inflation.
3) Try your wearable Inflatable PFD on and adjust it until it fits
comfortably in and out of the water.
4) Mark your Inflatable PFD with your name if you are the only wearer.
5) Do not alter your Inflatable PFD. If it doesn’t fit properly, get one that
does. An altered device is no longer Coast Guard approved.
6) Your Inflatable PFD is not intended for use as a fender or kneeling
pad.
7) If your
Inflatable PFD is wet, allow it to dry thoroughly before storing
it. Store it in a well-ventilated area.
8) Do not dry your Inflatable PFD in front of a radiator or other source
of direct heat.
Inflatable PFD Safety Accessories
For the MD3085 - MA7203 Re-arm Kit – Contains 33-gram replacement
CO
2
cylinder/bayonet assembly
for the manual inflator.
Inflatable PFD Owner’s Manual 22 23 Inflatable PFD Owner’s Manual