Filter
Top Products
Usage Below Freezing
When the temperature is below freezing, a fully discharged cylinder
may not adequately inflate your Inflatable Vest with LIFT
TM
Under these
conditions use the oral inflator to top-up the Inflatable Vest with LIFT
TM
It may be neccessary to manually release the Velcro
TM
tabs, located at the
bottom of the left and right panel covers, for full inflation because oral
inflation may not provide sufficient pressure to open the tabs.
Re-arming Your PFD
NOTE: A valid re-arm kit (MA7218-22) is required for this
procedure.
1) Place the Inflatable Vest with LIFT
TM
on a smooth, flat surface and
wipe off any water. Access the inflator by reaching under the cover
and fully expose the inflator for re-arming. Hold the CO
2
cylinder
through the fabric, using one hand (Fig. 12).
FIGURE 12
11 MUSTANG SURVIVAL