Filter
Top Products
• Activating the CO
2
inflation system
• Re-arming the CO
2
inflation system
• Using the oral inflator tube
HOW DO YOU TEST YOUR PFD USING THE AUTOMATIC
INFLATOR?
1) To test your Inflatable Vest with LIFT
TM
, you will need your fully
armed Inflatable Vest with LIFT
TM
, and re-arming kit (MA7218-22)
approved for your Inflatable Vest with LIFT
TM.
2) Put on the Inflatable Vest with LIFT
TM
.
3) Get into shallow water, just deep enough that you can stand with
your head above the surface. Once the inflator is underwater, 4
inches or so, the Inflatable Vest with LIFT
TM
should fully inflate
automatically within 5 seconds.
4) See if the Inflatable Vest with LIFT
TM
will float you on your back or
just slightly back of vertical. In a relaxed floating position, verify
that your mouth is well above the water’s surface. Note the effect of
where you hold your legs on how you float.
5) Get out of the water and remove the Inflatable Vest with LIFT
TM
.
6) Deflate the Inflatable Vest with LIFT
TM
by depressing the oral inflator
valve (see Deflation p. 10). Remove the used inflator.
7) Let the Inflatable Vest with LIFT
TM
dry thoroughly. Re-arm (p. 11) and
Repack the PFD (p. 17).
HOW DO YOU TEST YOUR PFD USING THE MANUAL
INFLATOR?
1) To test your Inflatable Vest with LIFT
TM
, you will need your fully
armed Inflatable Vest with LIFT
TM
, and re-arming kit approved for
your Inflatable Vest with LIFT
TM
: MA7218-22.
2) Put on the Inflatable Vest with LIFT
TM
.
27 MUSTANG SURVIVAL