Mustang Survival MD0450 22 Life Jacket User Manual


 
RE-ARMING YOUR PFD (p. 11).
NOTE: The single point indicator must be green before
proceeding.
2) Open the cover at wearer’s right-hand side of the chest and lay the
device flat.
3) Ensure the oral-inflation dust cap is in the stowed position (Fig. 22).
4) Ensure the single point indicator is green and the beaded handle is
attached to it’s Velcro tab; secure the zippers on the Inflatable Vest
with LIFT
TM
(see Repacking, p. 17).
5) Ensure the date on the inflator is not five years or older (Fig. 2). If it
is, replace the inflator (see Re-arming Your PFD, p. 11).
Readiness Checklist
Check your Inflatable Vest with LIFT
TM
and ensure all of the checkpoints
listed below are true before each use.
Single point indicator is green.
Ensure the current date is not past the date on the inflator. If it is,
replace the inflator (see Re-arming Your PFD, p. 11).
All zippers, Velcro
and waist buckle are securely fastened.
Inflatable Vest with LIFT
TM
is not twisted.
Oral-inflation dust cap is in the stowed position (Fig. 22).
Ensure the beaded handle is placed through the opening and is
attached to the Velcro tab on the outside of the vest (Fig. 35).
No rips, tears or holes; all seams are securely sewn; and the fabric,
straps and hardware are still strong.
Your Inflatable Vest with LIFT
TM
is ready for use if all boxes are checked.
NOTE: Contact your Mustang Dealer if you have any concerns
about the readiness of your Inflatable Vest with LIFT
TM
.
Inflatable Vest with LIFT
TM
Owner’s Manual 4