Filter
Top Products
64
Using the Quick Recycling Battery Pack SD-800
Use the provided quick recycling battery pack to install five batteries to shorten
the recycling time (p. 19).
Notes on using the Quick Recycling Battery Pack SD-800
•With the SD-800 attached, be sure to use five batteries.
• Be sure to replace all five batteries, including the one in this pack and
the four inside the SB-800, with fresh ones at the same time.
• Do not mix battery brands or types, or use old with new batteries.
Otherwise, the batteries may leak corrosive liquids, become hot, or
explode.
• This battery pack cannot be used when the Power Bracket Unit
SK-6/SK-6A is attached to the SB-800.
• The battery chamber lids for the SB-800 and SD-800 are identical.
■
■
■
Attaching the Quick Recycling Battery Pack SD-800
1
Slide the SB-800’s battery chamber lid in the
direction of the arrow to open.
2
Push the battery chamber lid back in the direction
of the arrow to remove it.
• The lid can be easily removed if pushed back past
the perpendicular position.
WARNING
Battery chamber lid
Battery chamber lid
attachment index
Quick recycling battery
pack lock switch