Filter
Top Products
11
Tighten the 2 screws.
7. Attach the front panel.
Insert the tab at the bottom of the front panel into the hole in the main body ➀, and push the plate cover
towards the main body. ➁
Use a screwdriver to securely tighten (clockwise) the 2 screws at the top of the front panel.
6. Securely connect the connectors. ➀
Secure the connectors to the plate cover.
➁
You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s
operation is stopped, but this sound is not abnormal.
If you cannot secure a connector to the plate cover, the connector is not completely
connected.
Connect the connector again.
Use the 3 supports on
the plate cover to
secure the connectors.
Battery replacement is complete.