Filter
Top Products
14
6. Securely connect the connectors. ➀
Secure the connectors to the plate cover.
➁
You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s
operation is stopped, but this sound is not abnormal.
If you cannot secure a connector to the plate cover, the connector is not completely
connected.
Connect the connector again.
Use the 2 supports at
the top and bottom of
the plate cover to secure
the connectors.
7. Attach the front panel.
Push the front panel toward the main body. ➀
Use a screwdriver to securely tighten (clockwise) the 4 screws at the top of the front panel.
➁
Battery replacement is now complete.
Tighten the 4 screws.