Filter
Top Products
11
1. Fix the mounting bracket in place by screwing through the slots in the
bracket.
2. Fix the remote head unit to the mounting bracket with the thumb screws
provided.
3. Connect the standard microphone to the remote head socket, and tighten up
the thumb screw.
Fitting the Controller Microphone Speaker (UHF200)
The Remote Head uses an 8 pin telephone style plug and socket:
1. Position the microphone plug so the plastic ap faces downwards, and press
the plug into the socket until it ‘clicks’.
2. Gently press the rubber boot into the hole surrounding the socket so that the
slot around the boot ts neatly inside the rim of the entry hole.
3. If required use the external cable (supplied) to allow the radio to be installed
further from the Controller Speaker Microphone.
Installation