Filter
Top Products
14
Operations
Power on and off
* Press and hold the PWR button on the UHF100 Remote Head or the UHF200
microphone PWR button for 2 seconds.
* The default channel is set at CH01.
200RX
CH
200RX
CH
UHF100 UHF200
Volume control
* The UHF100 has a rotary electric volume control. Adjust the volume by rotating
the channel knob clock-wise or adjust the volume control by pressing the
Volume Up or Volume Down buttons on the microphone.
* The UHF200 has Volume Up or Volume Down buttons on the microphone.
Adjust to the preferred volume level.
200RX
CH
200RX
CH
Channel Selection
* Briey press the PWR button. Select the channel by rotating the channel knob
clock wise or adjust the channel selection by pressing the Channel Up or
Channel Down buttons on the microphone from 1 to 40.
* The UHF200 has Channel Up or Channel Down buttons on the microphone.
Briey press the PWR button, this will allow you to select the preferred
channel.