Filter
Top Products
Part 13
The area required for wall mount application is determined by the
main unit dimensions and is 378 mm in width and 312 mm in height for KS-
6215 and is 410 mm in width and 355 mm in height for KS-6217.
CONNECTING CABLES
To re-assemble the main unit with stand assembly for operation,
please connect all required cables to the appropriate connectors. Please make
sure that each connector is connected to the correct port with the correct
orientation. Damages due to incorrect connection or orientation are not
covered by product warranty!
Some connectors like the LAN connector have to be gently inserted
until a click is heard. It is recommended that connectors such as the external
VGA and LPT connector be screwed into place once seated. The 4 COM ports
are of 10 pin RJ45 format and the DB9 to RJ45 conversion cables in
accessories should be used for regular RS232 cable to connect through.
Adjust the slack of each cable and close the cable cover. Re-adjust the
tilt angle of the screen for best viewing.
Connect the cables to appropriate external devices through the cable
exit at the bottom of stand assembly. Please make sure that each connector has
to be connected to the right device in the right way.
CAUTION: On doing any insertion or extraction of any connector, please
always hold the connector head itself instead of pulling on the
cable wire. Failure to do this could damage the cable and jack
that is considered as an artificial destruction and is not
covered by the warranty.
OPERATING SYSTEM RECOVERY
For KS systems with operating system in the uDOC, once the uDOC
is damaged for any reason, the thin client may fail to boot. A bootable new
uDOC will be required to have the workstation back to work. Please
follow instructions given by the System Integrator to deal with situations like
that. One more advice for uDOC application is that in spite of the fact that it is
used in the way like an ordinary HDD, usual utilities such as FDISK.EXE or
FORMAT.COM shall never be used on uDOC otherwise the boot sector of
operating system itself may be damaged and causing the uDOC no longer
bootable.
For KS systems preloaded with Windows XP Pro or WEPOS on HDD,
Posiflex provides recovery CD delivered with the touch terminal for the
preloaded operating system. The System Integrator shall take care of software
restoration after OS recovered. A Posiflex supplied USB interface CDROM
drive will be required for such action. Other brand CDROM drive may require
its specific driver different from what supported in the recovery CD. Should