• 2 •
IMPORTANT SAFETY INSTRUCTIONS – 1.
SAVE THESE INSTRUCTIONS.
This manual contains important safety and operating instructions.
Keep the inverter well ventilated in order to properly disperse heat •
generated while it is in use. Make sure there are several inches of
clearance around the top and sides and do not block the slots of
the inverter.
Make sure the inverter is not close to any potential source of •
ammable fumes or clothing.
Do not place the inverter in areas such as battery compartments •
or engine compartments where fumes may accumulate.
Keep the inverter dry.•
DO NOT allow the inverter to come into contact with rain or moisture.•
DO NOT operate the inverter if you, the inverter, the device being •
operated or any other surfaces that may come into contact with
any power source are wet. Water and many other liquids can
conduct electricity, which may lead to serious injury or death.
Do not place the inverter on or near heating vents, radiators or •
other sources of heat or ammable materials.
Do not place the inverter in direct sunlight. The ideal air •
temperature for operation is between 50° and 80°F.
Only connect the power inverter to a 12-volt accessory outlet or •
12-volt airplane power outlet. Do not attempt to connect the inverter to
any other power source, including an AC power source. Connecting
to a 6-volt or 16-volt battery will cause damage to the inverter.
Make sure the AC plug and/or USB connection is tight.•
Do not modify the AC or USB receptacle in any way.•
Do not try extending or otherwise changing the 12-volt plug •
attached to your inverter.
Incorrect operation of your inverter may result in damage and •
personal injury. WARNING: The inverter output is 120V AC and
can shock or electrocute the same as any ordinary household AC
wall outlet.
Do not open – No user-serviceable parts inside.•