Filter
Top Products
OPERATION AND ADJUSTMENT
APPLYING SILICONE LUBRICANT
To reduce the friction of the walking belt and minimize wear, a non-
oil-, non-petroleum-base silicone lubricant must be applied to the
.walking platform before the treadmill is used. Failure to apply lubri-
cant will reduce treadmill performance. WITH THE POWER CORD
UNPLUGGED, lift each side of the walking beltand spray lubricant
generously onto the indicated area. Reapply lubricant after every
ten hours of use, or whenever performance decreases. Lubricant is
available at most hardware and automotive stores. Uni°Sport TM sili-
cone spray is recommended.
Apply lubricant
to the entire
shaded area.
Silicone Lubricant _
PLUGGING IN THE POWER CORD
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the riskof electric shock.
This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the
power cord Into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
Ak DANG ER: Improper connection of the equipment-grounding conductor can result in a riskof elec-
tric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is proper-
ly grounded. Do not modify the plug provided with the product_f it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit,and has a grounding plug that looks like the plug illustrated in
Drawing 1.
A temporary adapter that looks like the adapter illustrated in Drawing 2 may be used to connect this plug to a 2-
pole receptacle as shown in Drawing 2 if a properly grounded outlet is not available. The temporary adapter
should be used only until a properly grounded outlet (Drawing 1) can be installed by a qualified electrician. The
green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground
such as a propedy grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal
screw.
Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to determine if
the outlet box cover is grounded before using an adapter.
Grounded Outlet Box
Grounding Plug
Grounding Pin
Grounded Outlet
.2
Metal Screw
Outlet Box
Grounding Pin
•Grounding Plug
7