Seiko Group 6S28 Boating Equipment User Manual


 
English
19
English
18
HOW TO USE THE TELEMETER
Before beginning, check that the stopwatch has been reset.
START
(Flash of light)
STOP
(Crash of thunder)
Press Button A to start the
stopwatch as soon as you
see light.
When you hear the sound,
press Button A to stop the
stopwatch.
Read the telemeter scale
that the STOPWATCH
second hand points to.
Approx. 3 km
• Thetelemeterscalecanbeusedonlywhenthemeasuredtimeislessthan60seconds.
3
2
1
HOW TO READ THE POWER RESERVE
INDICATOR
(CAL. 6S37 ONLY)
• Thepowerreserveindicatorletsyouknowthewindingstateofthemainspring.
• Beforeremovingthewatchfromyourwrist,observethepowerreserveindicator
to check if the watch has enough power stored to keep running until the next
time you wear it. If necessary, wind the mainspring. (To prevent the watch from
stopping, wind the mainspring to store the excess power that will allow the watch
to run for extra time.)
Power
Reserve
Indicator
Fully wound Half wound
Unwound
Approximately
50 hours
The watch either stops
or is running down.
Approximately
20 hours
Winding state of
the mainspring
Number of hours
the watch can run
* The position or design of the displays may differ depending on the model.