Seiko Group 6S28 Boating Equipment User Manual


 
English
21
English
20
* When the mainspring is fully wound, the crown can be turned further, or the
mainspring may wind without damaging the mainspring itself. The mainspring
of the watch employs a slipping mechanism, an automatic watch specific
mechanism, to prevent the mainspring from overwinding.
Remarks on the automatic mechanism of the mainspring
The mainspring of the watch becomes fully wound when it is worn for twelve
hours for three to five consecutive days. However, the winding state of the
mainspring may vary depending on actual use conditions, such as the number
of hours you wear the watch or the extent of your movement while wearing it. It
is recommended that you observe the power reserve indicator to check the level
of remaining power of your watch.
* In a case where you wear the watch for a short period of time each day, observe
the power reserve indicator to check the level of the remaining power. If
necessary, manually wind the mainspring.
TO PRESERVE THE QUALITY OF YOUR WATCH
CAUTION
CARE OF YOUR WATCH
• Thecaseandbandtouchtheskindirectly.Keepthecaseandbandclean
at all times. This will help to extend the life of the watch and will reduce
the risk of skin irritations.
• Whenyoutakethewatchoff,wipeoffmoisture,sweatorsoilwithasoft
dry cloth as soon as possible. This will help to extend the life of the case,
band and gasket.
<Leather strap>
• Gentlyblotupthemoistureusingasoftdrycloth.Donotrubtheleather,
as this may cause abrasions or discoloration.
<Metal bracelet>
• Tokeepthebraceletclean,useasofttoothbrushdippedincleanorsoapy
water. Be careful not to get water on the case.