Filter
Top Products
English
5
English
4
A
B
* The position or design of the displays may differ depending on the model.
CHARACTERISTICS OF A MECHANICAL WATCH
(self-winding type, automatic winding type)
● This mechanical watch operates using power obtained from a mainspring.
● If the watch is completely stopped, manually turn the crown approximately 20
times to wind up the mainspring to start the watch.
● While loss/gain of a quartz watch is indicated by a monthly or annual rate,
accuracy of a mechanical watch is normally indicated by a daily rate (loss/gain
per day).
● Normal usage accuracy of a mechanical watch varies according to conditions of
use (time period that the watch is worn on the wrist, temperature environment,
hand movement, and winding state of the mainspring).
● When the watch is affected by strong magnetism, it temporarily gains or loses
time. If the watch encounters a strong magnetic field, the parts of the watch may
be magnetized. In this case, repairs such as removal of magnetism are required.
Contact the retailer from whom the watch was purchased.
CAL. 6S28/6S37
NAMES OF THE PARTS
a)
Normal position : winding up the mainspring (manual operation)
b)
First click position : date setting
c) Second click position : time setting
Stopwatch hour hand
Small second hand
Minute hand
Calendar
CROWN
abc
CROWN
Center stopwatch hand
Hour hand
Stopwatch minute hand
To START/STOP the stopwatch
To RESET the stopwatch
Power reserve indicator
(Cal. 6S37 only)