Filter
Top Products
11
Using the SK 3063-U transmitter
Switching the transmitter on
̈ Attach the power pack to the transmitter.
̈ To switch the transmitter on, set the on/off switch ² to ON.
The red operation indicator ¶ lights up.
If the operation indicator ¶ does not light up, check the power
pack.
Setting the channel or the frequency
The assignment of a switch position/channel to a frequency is
listed on the type plate » of the transmitter (see page 4).
̈ To select a channel or a corresponding frequency, set the
channel selector switch · to the desired position.