Filter
Top Products
6
Putting the SK 3063-U transmitter into
operation
Selecting a microphone
The SK 3063-U transmitter can be used with the Sennheiser
MKE 2-4, MKE 102-4 (omni-directional) and MKE 40-4, MKE 104-4
(cardioid) clip-on microphones. The power supply of these
microphones is via the microphone input ¾ of the transmitter.
̈ Unscrew the coupling ring inorder to unlock the special audio
connector of the microphone.
Attaching and removing the battery pack
For powering the SK 3063-U transmitter, you can either use the
B 50/B 250 battery pack or the rechargeable BA 50/BA 250
accupack.
The display ´ at the front of
the power pack indicates the
charge status of the batteries/
rechargeable batteries.
The transmitter also transmits
the current battery status
information to the receiver
where it is shown on the display
panel.
ᕥ