Sevylor 2000016013 Boat User Manual


  Open as PDF
of 16
 
INFLATABLE BOATS
®
INFLATION INSTRUCTIONS
CAUTION!
Do not over inate. Pressurize product to "Ination Pressure"
stated in the chart for your specic product.
WARNING!
Never use a compressor, CO2 or compressed air to inate the boat.
Do not let your boat come into contact with sharp, pointed objects.
To begin inflation,
open external
stopper and pull to
extend out.
When fully inflated,
seal valve by
pushing in the pump
nozzle to maintain
seal. Gently back
pump out of valve.
Attach adapter hose
to inflation end of
QuickPump™ unit.
Insert hose and
turn on.
Fully remove adapter
and close external
stopper. Valve should
appear depressed
into itself.
To inate using any Sevylor
®
QuickPump™ unit:
To inate using the Sevylor
®
Dual Action Hand Pump or other
ination device:
To begin inflation,
open external
stopper and pull to
extend out.
To close valve:
Push in with
inflation device until
stopper has been
depressed, sealing
internal stopper.
Insert nozzle of
inflation device into
the extended valve
and turn on or begin
pumping.
Fully remove adapter
and close external
stopper.
Valve should appear
depressed into itself.
3
 previous next