Sevylor 2000016013 Boat User Manual


 
INFLATABLE BOATS
®
IMPORTANT! Inate the boat chambers in the following order:
Inate the inside all-around safety chamber.1.
Inate the oor chamber(s).2.
Inate the bottom tunnel chambers. (These tubular chambers are 3.
only found on Super Caravelle and Fish Hunter™ models.)
Inate the bustle chamber. (This support chamber positioned at 4.
the stern is found only on the large Super Caravelle models.)
Inate the outside main chamber.5.
The chambers on the boat will be numbered to indicate order of
ination also. This order of ination will ensure the proper volume and
buoyancy of the safety chamber.
Note: To inate the mini double lock valve, which is used on some of
the Sevylor boat oors and seat bottoms, follow the same ination
instructions above, using the mini double lock valve adapter. The mini
Double Lock™ valve adapter is included with all Sevylor
®
pumps.
The adapter can be purchased from Customer Service by calling
1-800-835-3278 (Part Number 5010000707).
CAUTION!
Water temperature and weather does affect the pressure in
inatable products. In cold weather your product will lose some
pressure due to the fact the air will contract. If this occurs, you
may want to add a little air to improve your products performance.
However, in hot weather, the air will expand. You must let some air
out to prevent your product from failing due to overpressure. You
should avoid exposing your product to extreme temperatures (hot
or cold).
DEFLATION INSTRUCTIONS
Deation instructions using
any
Sevylor
®
QuickPump™
unit:
Deation instructions using
the Sevylor
®
Dual Action
Hand Pump:
Remove adapter hose from inflation end and
attach to opposite deflation end of pump.
Repeat same steps as inflation. This will
draw the air out quickly.
Remove adapter hose from inflation port
and attach to deflation port on pump
handle. Repeat same steps as inflation. This
will draw the air out quickly.
4