Sevylor 2000016013 Boat User Manual


 
INFLATABLE BOATS
®
CARE & STORAGE:
These boats are made of the highest quality materials and
comply with NMMA (National Marine Manufacturers Association)
regulations. Altering the construction of these boats will void the
limited warranty and could jeopardize the safety of the occupants.
If your boat has been used in salt water, rinse it off with fresh
water as soon as possible.
Remove tar spots or other soiled areas by using a mild soap and
rinsing with fresh water.
Be sure your boat is completely dry before storing.
The boats may be stored inated, but do not place any heavy or
sharp objects on it. Storage is best in a dry room.
OPERATING INSTRUCTIONS:
Follow all local boating regulations and navigation rules.
Familiarize yourself with boating conditions where you plan to
use the boat. Use common sense and caution when operating in
unfamiliar places.
Observe the maximum weight the boat can carry and do not
overload past this limit. Over-loading jeopardizes the safety of the
occupants.
Be sure all accessories and/or equipment (e.g. oars, life jackets)
are in proper working condition before using the boat. Each
person occupying the boat is to wear an approved Personal
Flotation Device (life preserver).
Sharp objects are not to be carried in the boat without adequate
protection or storage.
When navigating the boat in any water depth, watch for
submerged or sharp objects that may damage or pierce the
boat’s air chambers.
Enter the boat from the port (left) or starboard (right) sides - not
from the fore (front) or aft (back) sides.
Never tow with a boat or any other vehicle.
WARNING!
Do not mount a motor on any boat that exceeds the Maximum
Horsepower Rating for your specic boat model.
All Sevylor
®
boats that have a Horsepower Rating can accept the
Sevylor
®
12V Trolling Motor, Model 2000004144 without purchasing
any additional mounting hardware. Refer to 12V Trolling Motor
mounting instructions.
Mounting any motor other than the Sevylor
®
12V Trolling Motor,
Model 2000004144, requires the Sevylor
®
Motor Mount Kit, Model
2000004146, which is sold separately.
MOTOR MOUNTING
8