English Sea Data
6
Due to different shapes of hulls, the log transducer has to be calibrated on all boats. See 4.2.5
For mounting of depth transducer, see instruction included with transducer.
2.3
Electrical installation
On the back of the instrument there are eight pins; Four for the screw connector for the log
transducer and four for the depth transducer. The connector is colour coded with green, yellow
white and ground sign. Connect the four wires from the log transducer according to the colours
to the connector for LOG, the blank wire is ground. If a depth transducer is connected use the
DEPTH connector for that. Power supply is either connected to green and ground for DEPTH or
LOG.
Log transducer and power supply Log and depth transducers and
power supply
Connect a 5 Ampere fast fuse between the power battery and instrument on the red plus
lead.
White
Yellow
Screen
Green
Black
Red