Filter
Top Products
English Sea Data
8
3.2. Log functions
3.2.1. Boat speed
The main functions displays the boat speed. The unit (Knots or Miles/h)
is selectable during calibration, see 4.2.4.
3.2.2. Water temperature
To view water temperature press UP or DOWN until the text TMP is
displayed. The water temperature can be displayed in Celsius or Fahr-
enheit.
To change unit, see 4.2.8.
3.2.3. Trip distance
To view the trip distance press UP or DOWN until the text TRP is dis-
played. To clear the trip distance press UP and DOWN together.
Range: 0-199.99 Nm.
3.2.4. Total distance
To view the total distance press UP or DOWN. Total distance is not
possible to clear and will be stored in the instruments permanent
memory.
Range. 0- 19999.99 Nm.
3.2.5. Depth
To view depth press UP or DOWN until the text DPT is displayed.
The depth function is only displayed if instrument type is set to
combi. To change instrument type, see 4.2.3.
3.3. Illumination
The LCD and push buttons have three levels of illumination. To turn
on light, press MODE until the text Lit appears. Change level with
UP or Down and lock selection with KEY.