Filter
Top Products
Sea Data English
7
3 Function overview
The SEA Data instrument can work as a log instrument, a depth instrument or as a combined
log/depth instrument. You simply select the type of instrument you want, during calibration.
3.1 How to use the push buttons
3.1.1. Mode / Light button
This button is used to change between Log mode and Depth mode. One short
press changes between the two modes. To select light levels press mode for
more than two seconds.
3.1.2. Down button
This button is used to move down in the sub function list or to decrease a value in set mode.
3.1.3. Up button
This button is used to move up in the sub function list or to increase a value in set mode.
3.1.4. KEY button
This button is used to lock/unlock a value, to be able to change it.
3.1.5. Clear
To clear a value or reset trip distance press UP and DOWN together.