Filter
Top Products
SVA-SERIES • VIBRATOR MOTOR — PARTS AND OPERATION MANUAL — REV. #1 (06/13/07) — PAGE 7
SVA-SERIES — RULES FOR SAFE OPERATION
GENERAL SAFETY RULES
■
DO NOT operate or service this equipment
before you read, understand, and comply
with all safety messages in this manual.
The manual must be kept available and
accessible to the operator.
RULES FOR SAFE OPERATION
■
ALWAYS check the vibrator motor for loosened hardware
such as nuts and bolts before starting.
■
Replace nameplate, operation and safety decals when they
become difficult to read.
■
NEVER use accessories or attachments which are not
recommended by the manufacturer for this equipment.
Damage to the equipment and/or injury to user may result.
WARNINGWARNING
WARNINGWARNING
WARNING
Failure to follow instructions in this manual may lead to serious
injury or even death! This equipment is to be operated by
trained and qualified personnel only! This equipment is for
industrial use only.
■
NEVER operate a vibrator motor while under the influence of
drugs, alcohol, or medications that may impair the senses or
reactions.
■
NEVER use this machine for any purpose other than those
described in this manual.
■
This equipment should not be operated by persons under
the minimum statutory age limit.
The following safety guidelines should always be used when
operating the SVA-SERIES Vibrator Motor.
VIBRATOR MOTOR OPERATION SAFETY RULES
■
Dress properly. Wear appropriate clothing and protective
safety equipment. Wear clothing that will not likely become
caught in the equipment or snag on the forms. Eye, hand,
hearing, and foot safety equipment is required.
■
Manufacturer does not assume responsibility for any accident
due to equipment modifications. Unauthorized equipment
modification will void all warranties. Any modification which
could lead to a change in the original characteristics of the
machine should be made only by the manufacturer who shall
confirm that the machine is in conformity with appropriate
safety regulations.
■
Keep untrained personnel away. DO NOT let visitors contact
the vibrator unit. All visitors should be kept away from the
work area.
■
Keep work area well lit.
■
Keep work area clean and well organized. A cluttered area
invites injuries.
■
ALWAYS clear the work area of any debris, tools, etc. that
would constitute a hazard while the vibrator motor is in
operation.
■
ALWAYS be sure the operator is familiar with proper safety
precautions and operations techniques before using vibrator
motor.
■
DO NOT overreach. Keep proper footing and balance at all
times.
■
Secure forms. Make sure the form work is well made and
braced to withstand the stresses made by vibration.
■
Keep vibrator motor clean for better and safer operation.
■
Inspect motor cord periodically and if damaged, have it
repaired by an authorized service facility.
■
Before each use
ALWAYS
check the motor to make certain
there are no damaged parts, and that all parts function
properly, (examples: switch, cord housing). If any damage or
malfunctioning parts are found, have them repaired or
replaced by an authorized service facility.
■
Use only factory authorized identical
replacement parts
.
■
Always observe all applicable compulsory regulations
relevant to environmental protection, the handling of
hazardous substances, and the wearing of protective clothing
and equipment. Instruct the user as necessary, or, as the
user, request this information and training.