Filter
Top Products
19
2.3. WATER CONTACTS
The water contacts control the automatic activation of the Dive Mode.
The water and data transfer contacts are located on bottom of the case (Fig 2.3.).
When submerged the water contacts are connected to the push buttons (which are
the other pole of the water contact) by the conductivity of the water. The “AC” text
(Active Contacts, Fig. 2.4.) will appear on display. The AC text will be shown until the
water contact deactivates or the dive computer enters the Dive Mode automatically.
C
L
O
S
E
O
P
E
N
A
B
Fig. 2.3. Depth sensor
(A), water/data transfer
contacts (B).
Fig. 2.4. Active water
contacts are indicated by
the text AC.