Suunto SS021643000 Scuba Diving Equipment User Manual


 
5. Repeat for minutes.
6. Press [MODE] to exit.
3.8 Depth alarm
By default the depth alarm sounds at 30 m (100 ft). You can adjust
the depth according to your personal preference or switch it off.
To adjust the depth alarm:
1. While in a dive mode, keep [DOWN] pressed to enter settings.
2.
Press [UP] to scroll to Depth Alarm and press [SELECT].
3. Press [UP] to toggle the alarm on/off and confirm with [SELECT].
4. Adjust depth with [DOWN] or [UP] and accept with [SELECT].
5. Press [MODE] to exit.
When the depth alarm activates, the backlight blinks and the low
priority audible alarm pattern sounds. Acknowledge the alarm by
pressing any button.
3.9 Display contrast
You can adjust the contrast of the display according to your
preference or, for example, to suite changing dive conditions.
1. While in time mode, keep [DOWN] pressed.
2.
Press [UP] to scroll to
Contrast
and press [Select].
3. Use [DOWN] or [UP] to change the contrast from 0 (lowest) to 10
(highest).
4. Press [MODE] to exit.
28