Filter
Top Products
55
Operation Guide
Operation Guide
To Verify the Performance of external media:
1. Press the DISK UTIL button. If the Active Drive is the Internal drive,
then select Set.
2. From the Set Active Drive menu, Select External, then select OK.
3. Select Verify. When the message appears asking you to confirm the
operation, select OK. After a couple of minutes, the result of the test
will be reported in the front panel display.
4. After the performance verification is completed, select Continue.
Mount/Refresh Drives
The Mount/Refresh drives command
updates the MDR24/96 Project file
lists to reflect the current status of
both the internal and external drives.
Use this command to mount a new
Mackie Media PROJECT disk, or to view the size of files in a Project file list.
To Mount drives:
1. Press the DISK UTIL button. Select Mount.
2. Press the DISK UTIL button again to exit after the mounting operation
is complete.
DISK UTILITY MENU
Mount Format Verify