Filter
Top Products
Turning on the power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the Monitoring of power condition
section in Chapter 5, Power and Power-Up Modes for more information.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
1. Open the display panel.
2. Press and hold the computer's power button for two or three seconds.
Figure 1-5 Turning on the power (R950)
1
Figure 1-6 Turning on the power (R940)
1
Figure 1-7 Turning on the power (R930)
1
1. Power button
Product appearance depends on the model you purchased.
User's Manual
1-6