Filter
Top Products
_hOh__-
WEATHER ALERT
The Weather Alert Mode can be activated to alert you of dangerous
weather. When Weather Alert is turned on, and a warning signal is
received, a siren will sound at full volume, regardless of the VOL setting.
When the signal stops, you will hear the active weather channel broad-
cast at normal volume.
To activate the Weather Alert Mode:
1. Press GRP, the Press HLD to begin Weather Channel Scan.
2. When Weather Scanning stops on the active Weather Channel,
Press HLD.
3. Press F/C, then Press HLD to turn the Weather Alert on.
OR
1. Manually select the active Weather Channel by turning the Rotary
Channel Selector.
2. Press F/C, then Press HLD to turn the Weather Alert on.
Press F/C, then Press HLD, to cancel Weather Alert Mode.
TRANSMITTING
When the power is turned on, the transmitter is set for 25 Watts (except
for USA Channels 13 and 67). The HI indicator will appear on the LCD
Panel, indicating 25 Watt output power. In order to comply with FCC
Regulations contained in 47 CFR 80.215 (g) (3), USA Channels 13 and
67 transmit at 1 Watt regardless of the H/L selector setting. However, 25
Watt output for emergency use is available by pressing H/L while press-
ing the Press-To-Talk switch. When the H/L switch is released, the
radio returns to the 1 Watt position.
To switch to the LO (1 Watt) position, Press H/L. The LO indicator will
appear on the LCD Panel, indicating 1 Watt output power. The LO
position should always be used for in-port or short range communica-
tions.
Press H/L to switch to the HI (25 Watt) position. The HI indicator will
appear on the LCD Panel, indicating 25 Watt output power.
14
---
-
[--