Filter
Top Products
SPECIFICATIONS
GENERAL
Channels
Controls
Status Indicators
Channel Display
Selector Switch
Buttons
Connectors
Size
Weight
Supply Voltage
Standard Accessories
Antenna Impedance
Microphone
Speaker
Operating Temperature
Range
Shock and Vibration
FCC Approvals
TRANSMITTER
Power Output
Power Requirement
Modulation
55
80 Marine
10 Weather
: On-Off/Volume, Squelch
: TX LED (transmit)
DUAL, SEEK, SCAN, USA, INT'L, HI, LO,
[f] , WX,--- , FISH, USCG, and MEMO
on LCD Panel
: LCD (Dual 7 segment)
. Rotary Channel Selector
: HLD, DIM, H/L, SCN, C16, F/C, and GRP
: Antenna, remote speaker and DC power
: (2 1/5"H x 6 2/5"W x 8"L)
: 2.4 Ibs
: 13.8V DC negative ground
: Mounting bracket and hardware, DC
power cord, mike hanger, spare fuse.
. 50 ohms, nominal
: Rugged 500 ohms dynamic element with
coiled cord.
: 1.82 Inch, 8 ohms
: -20°C to +50°C (-4°F to +122°F)
: Transmit
Receive
: Meets or exceeds EIA standards, RS152B
and RS204C
: Type accepted under part 80 of the Rules;
meets Great Lakes Agreement and party
boat requirements.
: 1 watt or 25 watt (switch selectable)
: 1 watt output: 1.0A@ 13.8V DC
25 watts output: 4.5A @ 13.8V DC
: FM,.:t5 kHz deviation (FCC designator
F3E)
. 45 dB @ 3 kHz
Hum and Noise
Signal-to-Noise
Audio Distortion : Less than 5% with 3 kHz deviation with
1000 Hz modulating frequency
Spurious Supression : -60 dB @ 1watt, -65 dB @ 25 watts
Output Power Stabilization . Built-in automatic level control (ALC)
18
-----
~
-