Uniden MHS050 Marine Radio User Manual


 
19
Operation
UNIDEN MHS050 Handheld VHF Marine Transceiver
Scanning
The MHS050 can scan the channels programmed into memory, see
Programming Scan Channels on page 20.
To initiate scanning;
1. Assuming the unit is on CH17 when switched on.
2. Press (scan) and scanning starts. SCAN icon
appears during scanning.
The MHS050 will scan memory channels in ascending order.
If Triple Watch is turned on during scan then the radio will scan the
memory channels in ascending order and will check channel 09 and
channel 16 every 2 seconds, then resume scanning the memory channels.
SCAN
TRI
TX
MEM US
LOCK
LOHI
INT
CAN
HI
HI
HI
LO
TX
LO
LO
LO
SCAN MEM
LO
TRILO
TRILO
FULL Power On/Off Volume
Squelch
To Transmit
and Receive - 1
To Transmit
and Receive - 2
One-touch Channel - 1 ScanningOne-touch Channel - 2
MEM
LO
LO
LOCK
LO
TRILO
Triple Watch - 1 Triple Watch - 2 Triple Watch - 3
Mem Monitor Lock
SCAN
TRI
TX
MEM US
LOCK
LOHI
INT
CAN
HI
HI
HI
LO
TX
LO
LO
LO
SCAN MEM
LO
TRILO
TRILO
FULL Power On/Off Volume
Squelch
To Transmit
and Receive - 1
To Transmit
and Receive - 2
One-touch Channel - 1 ScanningOne-touch Channel - 2
MEM
LO
LO
LOCK
LO
TRILO
Triple Watch - 1 Triple Watch - 2 Triple Watch - 3
Mem Monitor Lock