Filter
Top Products
9
Getting Started
UNIDEN MHS050 Handheld VHF Marine Transceiver
Attaching the Beltclip
To attach the belt clip:
Slide the belt clip until it snaps into place.
To remove the belt clip:
To remove the belt clip, press and hold belt clip locker, slide the belt clip
at the same time until released.
Using the Carabiner Clip
Use the carabiner clip to conveniently secure the MHS050 to a belt or strap.
NOTE
The MHS050 will oat when the carabiner clip is not
connected and the battery cover securely fastened.
Charging the Battery Pack
Your radio includes charging cradle and rechargeable battery pack.
Follow these instructions to recharge the radio in the charging cradle.
NOTE
For the initial battery charge, make sure the
radio is off for optimum charging.
1. Connect the adapter’s plug to DC IN 12V jack
of the charging cradle and plug the other end into
an AC outlet.
2. Set the charging cradle on the desk or tabletop, and
place the radio in the charging cradle with the keypad
facing forward.
3. Make sure that the LED illuminates. Charge the battery
pack for 13 hours and remove the radio from the
charging cradle after charging.
(single charger shown)