3
WARNING: Risk of fire or explosion
The XPower 150 contains components that tend to produce
arcs or sparks. To prevent fire or explosion, do not install
the inverter in compartments containing batteries or
flammable materials or in locations that require ignition-
protected equipment.
WARNING: Fire hazard
To reduce the risk of fire, do not cover or obstruct the
ventilation openings. Do not install the XPower 150 in a
zero-clearance compartment. Overheating may result.
CAUTION: Risk of damage to equipment
The XPower 150 is designed to be directly connected to
standard electrical and electronic equipment in the manner
described in this guide. Do not connect it to household or
RV AC distribution wiring. Do not connect it to any AC
load circuit in which the neutral conductor is connected to
ground (earth) or to the negative of the DC (battery)
source.
CAUTION: Risk of damage to the XPower
150
Reverse battery polarity (negative connected to positive;
positive connected to negative) will damage the XPower
150, and it will require servicing. Damage caused by
reverse polarity is not covered by your warranty.
Xantrex150E.book Page 3 Thursday, February 16, 2006 10:07 AM