Filter
Top Products
20
High-input Voltage Shutdown If a defective battery charging system
causes the battery voltage to rise to dangerously high levels, the Digital
Inverter shuts down automatically. The over-voltage error code ‘E02’
will show on the digital display.
Overload Shutdown If you connect an AC load that is rated too high
(see Table 3) or a load that draws excessive surge power, the Digital
Inverter shuts down. The overload error code ‘E03’ will show on the
digital display.
Overheating Shutdown The Digital Inverter shuts down
automatically if it exceeds its safe operating temperature. The
overheating error code ‘E04’ will show on the digital display.
Shutting the inverter off
• If you are going to disconnect the battery, turn the inverter off first.
• Turn the inverter off by holding the switch until the display turns
off.
XP_Digital_200-400-800.book Page 20 Wednesday, October 26, 2005 2:51 PM