Filter
Top Products
3-21
E
EMG71210
PROCEDURE
1) Place the gear shift lever in the neu-
tral position.
2) Pull up the tilt lock lever.
3) Slightly tilt up the engine. The tilt-
support bar will lock automatically,
supporting the engine in a partially
raised position.
NOTE:
If the engine is tilted up completely, the
tilt-lock lever automatically locks. The
shallow water lever is no longer effective.
4) When lowering the engine, push the
tilt lock lever down. Slightly tilt up the
engine until the tilt-support bar auto-
matically returns to the free position.
Then, slowly lower the engine to the
normal position.
406042
N
402015
403056
403012
63V-9-14-3 4/25/01 2:04 PM Page 22