Filter
Top Products
3-29
E
EMU00310
PROCEDURE
1) Place the gear shift lever in the neutral
position.
2) Place the tilt lock lever in the release
position.
3) Slightly tilt up the engine. The tilt-sup-
port bar will lock automatically, support-
ing the engine in a partially raised
position.
NOTE:
@
This motor has 2 positions for shallow water
cruising.
@
RETURNING TO ORIGINAL
POSITION
1) Place the tilt lock lever in the lock posi-
tion.
2) Slightly tilt up the engine until the tilt-
support bar automatically returns to the
free position.
3) Then, slowly lower the engine to the nor-
mal position.
U68T13.book Page 29 Wednesday, August 8, 2001 12:37 PM